Installation instructions for junction with wall

Edge cut using DG tool: 
Straight cut with DG Support clip:
Edge cut with angle trim:
On one side you use the DG Support clip - on the other side you put the supporting edges on the profiles. This will create an 8 mm gap between the ceiling and the wall. 
On one side you use the DG Support clip - on the other side you put the supporting edges on the profiles. This will create a 15 mm gap between the ceiling and the wall.
Perimeter tiles are secured by the Perimeter clip. 
 
View in Windows Media Player by clicking on one of the images.


New edge Ds™ in Focus range

Ecophon Focus Frost

Ecophon Focus Frost Ds™ is a new ceiling system in the Ecophon Focus™ family, with the new Akutex Frost surface. The Focus Frost Ds system has a concealed grid and the sound absorbers a symmetrical edge design, allowing easier installation and easier integration of light fittings and ventilation.